Divided into 6 independent execution units, each controlled by a dedicated control panel.
It is ideal for filling liquids ranging from 50 µL to 700 µL, with filling accuracy maintained within approximately ±1%.
The housing is made of 304 stainless steel, while the pump heads are model KZ15-18.
These dual pump heads are installed using a phase-compensation mechanism and fixed in a precise 4-layer stacked configuration, creating a total of 24 filling channels.

안내사항 |
가격 기재가 되지 않은 별도 문의 상품인 경우 반드시 '온라인 견적문의' 혹은 '전화 문의' 후 구매 부탁드립니다. |
[Ditron-tech] GR6-6BS Peristaltic Pump Filling System
Product Introduction
◆ The GR6-6BS peristaltic pump is divided into 6 execution units, each controlled by a separate control panel.
◆ Suitable for filling liquids ranging from 50 µl to 700 µl, with filling accuracy maintained within approximately ±1%.
◆ The exterior is made of 304 stainless steel.
◆ The pump head is KZ15-18, with a phase-compensation installation method for the two pump heads.
◆ 4-layer stacked installation and fixation, forming 24 channels
◆ Switching contact control, with 24 channels enabled and disabled simultaneously.
Applicable Pump Head


Pump head series connection

◆ Two pump heads are connected in series, with the front and rear pump head rollers installed offset from each other—specifically, the front pump head roller is positioned between the two rollers of the rear pump head.
◆ The inlet and outlet pipelines of the front and rear pump heads are connected separately using three-way fittings, allowing the fluids in the front and rear pump head pipelines to mutually compensate for each other.
◆ Liquid pulsation is significantly reduced, with flow accuracy exceeding ±0.5%.
Technical Specifications
| Product Model | GR6-6BS |
| Rotational Speed Adjustment Range | 1-300RPM |
| Rotational Speed Resolution | 1RPM |
| Portioning Function | Quantitatively dispensing liquids |
| Filling accuracy error | Around ±1% |
| Number of Repackaging Times | 1 to 9,999 times ("0" indicates infinite looping) |
| Dispensing Time Interval | 0.1S-24Hr |
| Display function | 128×32 graphic dot-matrix LCD display, showing flow rate and rotational speed on the same screen |
| Direction Control | Reversible Operation Direction Function |
| Operating Method | The rotary encoder switch, combined with the membrane keypad operation, offers users greater convenience. |
| Full-speed function | The pipeline can be quickly filled and drained using the full-speed button. |
| Power-loss memory function | After power is restored, resume operation according to the state before the power outage. |
| Retraction function | Operating in distribution mode, the pump reverses direction by a certain angle after shutting down, effectively preventing liquid from dripping. |
| Liquid Volume Distribution Correction Function | Enter the actual liquid allocation value to automatically perform liquid allocation correction. |
| Start-stop control | Switching contact control for start/stop |
| Dispensing Bracket | Optional filling bracket installs the filling nozzle. |
| Power Consumption | <150W |
| Applicable Power Source | AC 200–260V, 50Hz/60Hz |
| Work environment | 0–40°C, humidity <80% with no condensation |
| Protection Level | IP31 |
External dimensions


◆ The six M6 threaded holes at the bottom are for mounting.
GR6-6BS Peristaltic Pump Filling System
모바일 환경에서는 표를 좌·우로 스크롤해주세요.
고객센터
배송안내
배송기간
주의사항

안내사항 |
가격 기재가 되지 않은 별도 문의 상품인 경우 반드시 '온라인 견적문의' 혹은 '전화 문의' 후 구매 부탁드립니다. |
[Ditron-tech] GR6-6BS Peristaltic Pump Filling System
Product Introduction
◆ The GR6-6BS peristaltic pump is divided into 6 execution units, each controlled by a separate control panel.
◆ Suitable for filling liquids ranging from 50 µl to 700 µl, with filling accuracy maintained within approximately ±1%.
◆ The exterior is made of 304 stainless steel.
◆ The pump head is KZ15-18, with a phase-compensation installation method for the two pump heads.
◆ 4-layer stacked installation and fixation, forming 24 channels
◆ Switching contact control, with 24 channels enabled and disabled simultaneously.
Applicable Pump Head


Pump head series connection

◆ Two pump heads are connected in series, with the front and rear pump head rollers installed offset from each other—specifically, the front pump head roller is positioned between the two rollers of the rear pump head.
◆ The inlet and outlet pipelines of the front and rear pump heads are connected separately using three-way fittings, allowing the fluids in the front and rear pump head pipelines to mutually compensate for each other.
◆ Liquid pulsation is significantly reduced, with flow accuracy exceeding ±0.5%.
Technical Specifications
| Product Model | GR6-6BS |
| Rotational Speed Adjustment Range | 1-300RPM |
| Rotational Speed Resolution | 1RPM |
| Portioning Function | Quantitatively dispensing liquids |
| Filling accuracy error | Around ±1% |
| Number of Repackaging Times | 1 to 9,999 times ("0" indicates infinite looping) |
| Dispensing Time Interval | 0.1S-24Hr |
| Display function | 128×32 graphic dot-matrix LCD display, showing flow rate and rotational speed on the same screen |
| Direction Control | Reversible Operation Direction Function |
| Operating Method | The rotary encoder switch, combined with the membrane keypad operation, offers users greater convenience. |
| Full-speed function | The pipeline can be quickly filled and drained using the full-speed button. |
| Power-loss memory function | After power is restored, resume operation according to the state before the power outage. |
| Retraction function | Operating in distribution mode, the pump reverses direction by a certain angle after shutting down, effectively preventing liquid from dripping. |
| Liquid Volume Distribution Correction Function | Enter the actual liquid allocation value to automatically perform liquid allocation correction. |
| Start-stop control | Switching contact control for start/stop |
| Dispensing Bracket | Optional filling bracket installs the filling nozzle. |
| Power Consumption | <150W |
| Applicable Power Source | AC 200–260V, 50Hz/60Hz |
| Work environment | 0–40°C, humidity <80% with no condensation |
| Protection Level | IP31 |
External dimensions


◆ The six M6 threaded holes at the bottom are for mounting.
GR6-6BS Peristaltic Pump Filling System
모바일 환경에서는 표를 좌·우로 스크롤해주세요.
고객센터
배송안내
배송기간
주의사항
비코사이언스
대표이사 : 이성렬
주소 : 경기도 화성시 경기대로 1010번길 10, 101호 비코사이언스
전화 : 031-232-6799|팩스 : 031-8057-6779
이메일 : sales@vikosci.co.kr
입금계좌 : 국민은행 351901-04-325680
