PC housing,crystal

Fixed tube-pressing gap, tackable

Economical for ODM purpose

Excellent heat and corrosion resistance

Rigidity, high hardness wide flow range

Various tube option

Flow rate range≤2200ml/min

Large flow, double pump heads stackable

Mirror polish surface

Tube fixing form: clamp and connector

304 stainless steel and conform to GMP standard

Mostly used in pharmaceutical and food industry

Flow rate≤12000ml/min

Large flow, double pump heads stackable

Mirror polish surface

Tube fixing form: clamp and connector

304 stainless steel and conform to GMP standard

Mostly used in pharmaceutical and food industry

Flow rate≤12000ml/min

PPS material with good resistance to acid,alkali

Phase compensation structure to reduce pulsation

Compact size, professsional tube assembly, suitable for accurate micro dose filling.

Flow rate ≤960ml/min

flow rate≤13000ml/min

large flow,widely used in industrial areas

Optimized structure design to prevent breaking of pressing block

Double pump heads can be stacked to transfer 2 liquids

Tube fixing form:1. tube connector 2. tube clamp

Adjustable tube-pressing gap to expand tube  lifespan

Precision micro flow  transfer

Adjust tube-pressing gap by rachet

6 rollers: higher flow; 10 rollers: lower pulsation

Independent cartridge: made of POM, durable and excellent chemical compatibility

PC housing,PPS pressing block. good rigidity

Tube fixing form: clamp and tube connector

Good self-lubricating to reduce the friction of tube

Transparent housing, easy to watch the working status

Flow rate range: ≤6000ml/min

Single channel flow range:≤4140ml/min

the flow rate ranges≤5370ml/min

High precision, small size, long life, suitable for a single fluid transfer of less than 5ml

Precision: ≤5‰
Stroke length: 3000 steps (30mm)
Control precision: 1 step（0.01mm）
Speed: 0.025-25mm/s
Single stroke operating time：1.2–1200s
Compatible Syringe: 50ul、100ul、250ul、500ul、1ml、2.5ml、5ml
Valve type: two position three way electromagnetic valve
Turn time: ≤100ms
Fluid Path: borosilicate glass, PTEF, PEEK
Max pressure: 0.1MPa

Precision: ≤5‰
Stroke length: 1000 steps (30mm)
Control precision: 1 step （0.03mm）
Speed: 0.5-15mm/s
Single stroke operating time：2–60s
Compatible Syringe: 500ul、1ml、2.5ml、5ml
Valve type: two position three way electromagnetic valve
Turn time: ≤100ms
Max pressure: 0.1MPa

Precision: ≤5‰
Stroke length: 6000 steps (60mm)
Control precision: 1 step (0.01mm)
Speed: 0.05-50mm/s
single stroke operating time:1.2–1200s
Compatible Syringe: 50ul,100ul,250ul,500ul,1ml,2.5ml,5ml,10ml,25ml
Valve type: two position three way electromagnetic valve
Turn time: ≤100ms
Max pressure: 0.1MPa

Precision: ≤5‰
Stroke length: 6000 steps (60mm)
Control precision: 1 step (0.01mm)
Speed: 0.05-50mm/s
single stroke operating time:1.2–1200s
Compatible Syringe: 50ul,100ul,250ul,500ul,1ml,2.5ml,5ml,10ml,25ml
Valve type: two position three way electromagnetic valve
Turn time: ≤100ms
Max pressure: 0.1MPa

Single-channel push-pull syringe pump can be used for two-way circulation. 

Suitable for small flow, 

high precision, 

continuous transmission

LST01-1B injection pump is a perfusion/extraction type, 

single-channel injection pump, 

touch screen control, 

integrated structure

Dual-channel push-pull syringe pump, 

touch screen control, 

suitable for long-term micro-injection experiments

Power: DC 12V.
Speed: fixed rotary speed, can choose various speed.
Max referenced flow rate:1200ml/min
Available Tubing: 15#,24#,35#,36#.
Dimension: 275*122*128 (mm)

Max flow rate: 183ml/min
Max pressure: 0.18MPa

Speed error: ±10%
Operating direction: CW
Start capacitor: safety capacitor
Power: 14W
Maximum noise: 45dB

Motor speed : ≤100rpm，Resolution:0.1rpm 

Humidity : ＜80%

Speed range: 0 -100rpm,
Speed adjustable: Manual adjusting switch, External control to control the various speed.
Speed precision；5 rpm/min
Available Tubing: 25#, 17#
Max referenced flow rate: 170ml/min
External control Type: 0-5V, 4-20Ma, 0-10Khz
Dimension: 130*73*82(mm)

Motor : AC MOTOR 

Power supply : AC 220V/14W 

Speed error : ≤10% 

Lifespan : 1800 hours 

Suitable temperature : 0-40℃ 

Suitable humidity : ＜80%

OEMQS100-01 / WX10-14 / 18 peristaltic pump recommended maximum speed of 100rpm; equipped with micro-pump head, 

suitable for wall thickness of 0.8 to 1.0mm hose, 

single-channel four-wheel or eight-wheel. Direct drive by the user 42-type stepper motor, 

the use of embedded soft-connect installation, 

and customized according to user requirements. 

Mainly in the equipment, 

equipment supporting the use of 38mL / min to achieve the following fluid transmission.

Motor speed：≤60rpm
Max flow rate：24ml/min
Suitable tubing：ID≤3.17mm Wall thickness:0.8-1.0mm
Working relative humidity：＜80%
Working termperature：0℃-40℃

Measurement107*60*60mm

Peristaltic pump from the 57 stepper motor with mounting bracket composed of small size, 

simple structure of the peristaltic pump drive products. 

Mainly in the equipment, equipment, 

supporting the use of a variety of pump head can be used to achieve the following 1140mL / min fluid transmission. 

By the user direct drive stepper motor to control the work process, 

using the floor, 

panel compatible installation.

Adopt step motor, soleplate installation, Stepless speed regulation,   External can control the start and stop. Flow rates:≤1140ml/min

57 stepping motor, rear drive circuit, reducing occupied volume Flow range: ≤2200ml/min

Multi-port valve, accurate positioning, RS232/485 communication mode, can be customized

micro flow, embedded peristaltic pump, small volume, easy installation

Suitable for general instruments and laboratory use

flow rate ≤1140ml/min

Handle on top for easy moving and carrying

Switch,knob and key in front panel make it more user-friendly

Can connect with dispensing controller FK-1A for quantitive filling

Mainly used in laboratory,industry,research institute and college for liquid filling

User-friendly operation interface

Various control modes,standard external control port and RS485 communication

Upper handle and knob in front, convenient to use

max flow rate :1140ml/min

industrial large flow filling-functioned peristaltic  pump

Cast aluminum housing, high IP rating, suit for dustful,humid environment

DC brushless motor, water-proof membrane key.

External control and communicationi available

Flow rate ≤13000ml/min

use in large volume filling in laboratory and industry

DC brusless high torque motor can drive multi pump heads.

Flow rate≤6000ml/min

Max flow rate：6000ml/min

Filling liquid volume range: 0.1-30ml, filling time range: 0.5-30s

Filling liquid volume range: 0.1ml~9999. 99ml (display adjustment resolution: 0.01ml), support online calibration

Metal shell design, buttons and display adopt ergonomic design, and form an angle of 30° with the horizontal

Acid and alkali resistance, corrosion resistance

Displayed in Chinese and English, the speed is increased to 200rpm, and the touch screen control can realize simple sub-assembly, timing and quantitative, and continuous sub-assembly. Flow test and other functions

Filling liquid volume range: 0.5-100ml, filling time range: 0.5-30s

high torque output and can stack multi pump heads

128×64 dot matrix LCD display both flow rate and motor speed

Flow rate calibration function

Single flow rate≤380ml/min

Max flow rate:380ml/min

• Flow range:≤13000ml/min

• Flow rate≤380ml/min
• The most popular peristaltic pump used in laboratory
• Accurate quantitive filling fuction, automatic calibration
• Remote control by PLC or host computer
• Compact size and exquisite appearnce ,stable performance
• The operation panel with 18° angle make the pump easy to use

flow rate≤380ml/min

compact size,widely used in laboratory

Flow rate range≤380ml/min

The most popular standard peristaltic pump,food grade,sanitary ABS housing

Widely used in pharmaceutical and food industry,college ,laboratory,inspection institute

The operation panel with 18 ° angle that conform to ergonomics and user-friendly

The built-in high capacity battery can power the pump for 4-5 hours, 

suitable for suitation without power access outdoors like water, 

air sampling in field.

4- bar power indicator to show the remaining power .

It is the first patented peristaltic pump that conbine with rechargable battery in China

Flow rate ranges≤2100ml/min

Industrial peristaltic pump, 

high IP rate

Suitable for humid and dusty industrial production environment

Handle on top for carring conveniently

Can be connected with FK-1A dispensing controller for quantitive filling

DC brushless motor drive,

High efficient,low vibration.

high torque and manitenance free

Multi control modes: can be controlled by analog singals via standard ex-control port and communication control with PC.

High IP rating,can stack multi pump heads

High torque output,low vibration,

efficient DC brushless motor, 

maintenance free

Industrial variable speed peristaltic pump,

stainlesss steel housing

Powerful DC motor drivecan stack 2 pump heads.

Suitable for industrial big flow rate transfer

Flow range:≤13000ml/min

Flow range:≤13000ml/min

Mainly used in large flow for production

AC gear motor drive

Speed adjustable by frequency convertor

Pump drive and control in split body to improve the IP rating

Central convex roller and concave pressing block to reduce the friction of tubing

Transparent cover for watch the running status of the pump

Adjustable pressing block

Split body in design for remote control,install and maintenance

Flow range:≤380ml/min

High protection level, waterproof connector, 

mainly used in areas with harsh environments.

It is suitable for accurate transmission of flow in laboratories and industrial fields.

The speed can reach 300rpm and the flow can reach 1140ml/min.

The plastic-sprayed metal shell is stable and generous, 

and can be used in harsh industrial production environments.

The stepping motor is subdivided and driven,

the speed is less than or equal to 600 rpm and the plastic-sprayed metal shell is stable and generous, 

which can be used in the harsher industrial 

production environment.